“Fast and efficient. It brought the chain back to a clean cut with very little effort.”
Mike RobertsonVerified purchase
Image 1 of 6
TimberBite™ Hand-Crank Chainsaw Sharpener
Bring Back the Bite.
Sharpen your chainsaw chain without taking it off the bar. Hand-crank operation. No batteries to charge.
★★★★★ 4.9 (168 reviews)$69.00USD
- ✓Sharpen with the chain on the guide bar
- ✓Turn the hand crank—no outlet or battery needed
- ✓Use the guide to help line up each cutting tooth
- ✓Compact metal tool for the truck or toolbox
- ✓Includes three 5 mm sharpening bits
Your TimberBite™ kit:
1× TimberBite™ kit1 sharpener + hand crank + 3 × 5 mm sharpening bits$69.00 · Free U.S. shipping
Free tracked U.S. shipping • Estimated delivery: 8–14 days
🚚Free U.S. shippingTracked delivery
3Three 5 mm sharpening bitsIncluded in your kit
☻Customer supportHere when you need us
✓Secure checkoutProtected payment
RECOMMENDED BY THE BRANDS YOU TRUST
Buy With Confidence. Get Back to Work.
Recommended by the best tool brands, the TimberBite™ hand-crank chainsaw sharpener helps you keep your chain sharp and ready for the next job. Get yours today.
“It worked on the first try. The bar-mounted guide made the sharpening process much more controlled.”
Charles MillerVerified purchase“Light enough for the truck, solid enough for regular use, and simple to adjust.”
Ryan ScottVerified purchase
MADE FOR THE JOB AT HAND
Less Guesswork. More Control.
Leave the chain on the guide bar. Clamp on TimberBite™, line up the sharpening bit, and turn the hand crank. Keep it close for the next load of firewood or cleanup around the property.
Leave the Chain On
Clamp the sharpener to the guide bar and work on the chain while it stays installed.
Keep Your Sharpening Setup Consistent
Use the guide to help keep the sharpening bit aligned with each cutting tooth.
Turn the Hand Crank
Work by hand without an outlet, extension cord, or battery to charge.
Pack It and Go
Keep the compact metal tool in your truck or toolbox for work around the farm, cabin, or woodlot.
A Closer Look at TimberBite™
WHEN THE CUT GETS TOUGH
Give a Dull Chain the Attention It Needs
If your saw needs extra pressure or throws fine dust instead of chips, check the chain. It may be time to sharpen.
TimberBite™ clamps to the guide bar to support the tool as you work. The guide helps you line up the sharpening bit with each cutting tooth. Follow your chain manufacturer’s sharpening instructions.
- Guide-supported alignment
- Keep a consistent setup from tooth to tooth
- Touch up the chain where you work
NO BENCH. NO ELECTRICITY.
Get back to work without removing the chain
Clamp the metal body to the guide bar. Line up the sharpening bit with the cutting tooth, then turn the hand crank with light, steady pressure. You control the movement by hand.
Carry TimberBite™ in the truck or toolbox for firewood cutting, storm cleanup, and work around the property.
Manual operationNo outlet or battery neededThree 5 mm sharpening bitsIncluded in your kit
FOR ROUTINE CHAIN CARE
More confidence before the next cut
Don’t wait until every cut feels like a struggle. Check the chain when cutting gets harder, and sharpen it when needed.
Keep it handy for the firewood pile, the next fallen limb, and the jobs around your property.
GET MY KIT →HOW TO USE TIMBERBITE™
Clamp It. Crank It. Get Back to Work.
- 1Position the sharpener
With the chainsaw off, cool, and secured, position the sharpener on the guide bar near the cutting tooth.
- 2Secure the clamp
Tighten the clamp knobs until the sharpener is stable on the guide bar.
- 3Position the sharpening bit
Fit the 5 mm sharpening bit into the guide and adjust it until it lightly meets the cutting tooth.
- 4Turn the hand crank
Turn the handle steadily with light pressure. Repeat the setup for each cutting tooth, following your chain manufacturer’s instructions.
Setup illustrations. Follow your saw and chain manufacturer’s operating and sharpening instructions.
ONE KIT. READY TO PACK.
What’s in Your TimberBite Kit
One TimberBite™ hand-crank chainsaw sharpener, one hand crank, and three 5 mm sharpening bits. The chainsaw is not included.
- Construction
- Metal body with adjustable clamp knobs
- Included sharpening bits
- Three 5 mm sharpening bits
- Operation
- Manual hand crank—no outlet or battery needed
- Fit check
- Match the 5 mm sharpening bits to your chain manufacturer’s specified size. Confirm that the clamp fits your guide bar.
- Where to keep it
- Workshop, truck, or toolbox
3BITS5 MM EACH
FOR THE TRUCK AND TOOLBOX
Keep Your Kit Within Reach.
Keep the sharpener, hand crank, and three included sharpening bits together for the next job. A compact kit that goes where your saw goes.
- ✓ Manual operation
- ✓ Three 5 mm sharpening bits included
- ✓ Free U.S. shipping
- ✓ Estimated delivery: 8–14 days
LESS GUESSWORK
TimberBite vs. Freehand Filing
Both tools are portable and made of metal. TimberBite™ adds a clamp for guide-bar support and a hand crank to move the sharpening bit.
FeatureTimberBite™Freehand Filing
Clamps to the guide bar✓—
Metal sharpening tool✓✓
Easy to carry✓✓
Hand-crank operation✓—
Tool support during sharpeningGuide-bar clampBy hand
KEEP IT CLOSE FOR THE NEXT JOB
Get Your TimberBite Kit
One hand-crank sharpener. Three 5 mm sharpening bits. Free tracked U.S. shipping.
✓ Secure payment✓ Free U.S. shipping✓ Order support
$69.00GET MY KIT →Estimated U.S. delivery: 8–14 days. Delivery is available within the 50 U.S. states and Washington, D.C.
FREQUENTLY ASKED QUESTIONS
Before You Buy
What’s in the kit?+
You get one TimberBite™ hand-crank chainsaw sharpener, one hand crank, and three 5 mm sharpening bits. The chainsaw is not included.
Will it work with my chain and guide bar?+
Check the sharpening size specified by your chain manufacturer. This kit includes 5 mm sharpening bits, which are not the right size for every chain. The clamp must also fit your guide bar. Confirm both before ordering, and follow your chain manufacturer’s sharpening instructions.
Do I have to remove the chain?+
No. TimberBite™ clamps to the guide bar so the chain can stay installed. Make sure the chainsaw is off, cool, and safely secured. Follow your saw and chain manufacturer’s safety and sharpening instructions.
Does it need electricity or a battery?+
No. Turn the hand crank to move the sharpening bit. There’s no outlet to find or battery to charge.
How do I order?+
Select Buy TimberBite or Get My Kit to go to secure checkout. One kit is $69 USD with free U.S. shipping. Enter your contact and delivery details, choose a payment method, and review your final total, including any applicable taxes, before you pay.
Where do you ship, and how long does it take?+
Shipping is free and tracked within the 50 U.S. states and Washington, D.C. Estimated delivery is 8–14 days. You can follow your shipment on our order-tracking page.
How can I get help with my order?+
Email bigboone.help@gmail.com. You can also track your order here.
CUSTOMER REVIEWS
168 reviews
★★★★★ 4.9 out of 5
★★★★★
“Fast and efficient. It brought the chain back to a clean cut with very little effort.”
Mike Robertson✓ Verified purchase
★★★★★
“It worked on the first try. The bar-mounted guide made the sharpening process much more controlled.”
Charles Miller✓ Verified purchase
★★★★★
“Light enough for the truck, solid enough for regular use, and simple to adjust.”
Ryan Scott✓ Verified purchaseMore reviews from chainsaw owners
My saw was throwing dust instead of chips. After a quick touch-up with ProfiSaw, it went back to cutting cleanly.
James Walker✓ Verified purchase
Simple to clamp on and easy to control. I like that the chain stays on the bar.
Mark Thompson✓ Verified purchase
It sharpened the chain quickly and earned a permanent spot in my truck toolbox.
David Miller✓ Verified purchase
I work on rural property and need tools that travel well. This one is compact and straightforward.
Andrew Collins✓ Verified purchase
The guided setup makes it easier to keep the cutters more consistent than when I use a loose file.
Robert Davis✓ Verified purchase
My chainsaw feels much smoother in the cut after using it.
Daniel Wilson✓ Verified purchase
The chain used to chew through wood. After sharpening, it started pulling clean chips again.
Kevin Moore✓ Verified purchase
Fast, easy, and useful for touch-ups between bigger jobs.
Brian Anderson✓ Verified purchase
A controlled, repeatable way to maintain the chain without carrying electric equipment.
Michael Taylor✓ Verified purchase
I was skeptical, but the setup was simple and the sharpening result was easy to notice.
Jason Thomas✓ Verified purchase
No more fighting a dull chain halfway through a firewood pile.
Steven Jackson✓ Verified purchase
It is easy to understand and does exactly what I bought it for.
Eric White✓ Verified purchase
A consistent cutter profile matters on the job, and the bar-mounted guide helps a lot.
George Harris✓ Verified purchase
Solid metal construction and a useful size for field maintenance.
Scott Martin✓ Verified purchase
Quick setup, controlled sharpening, and a cleaner cut afterward.
Anthony Clark✓ Verified purchase
I keep one at home and another in the truck. The two-pack made sense for me.
Ryan Lewis✓ Verified purchase
I maintain equipment for our property and this is a practical addition to the toolbox.
Christopher Lee✓ Verified purchase
It reduced the time I spend touching up chains and helped me get back to cutting sooner.
Patrick Hall✓ Verified purchase
The saw feels more efficient after a few controlled passes on each cutter.
Jeff Allen✓ Verified purchase
Compact, sturdy, and easy to use once the guide is adjusted.
Thomas Young✓ Verified purchase
These featured comments are a selection from the 168 product reviews.